U.S. Tsubaki Xceeder™ Chain
A Revolutionary Innovation in Lube-free Chain
Lock out dirt
Lock in lube
Exceed Your Expectations
•
Lasts up to ten times longer than other lube-free chain
•
Reduces downtime and maintenance costs
•
Keeps applications running clean
We’ve exceeded the standards for lube-free chain performance!
•
Longer wear life
•
Lower maintenance costs
•
Increased productivity
Ten years after introducing number-one LAMBDA® Chain to the market, U.S. Tsubaki has developed innovative technology that sets the bar even higher for lube-free chain performance. Revolutionary Xceeder Chain saves you time and money.
Dual Protection for Ultra-long Wear Life
Xceeder Chain is a quantum leap for power transmission technology. We start with a special coated pin and oil-impregnated sintered bushing for long-term internal lubrication. Then we extend the protection with special, high-density felt seals (patent pending) that lock in lube while keeping dirt and abrasives out. The result? Xceeder Chain lasts up to ten times longer than other lube-free chain.
Normal Temperature Range (+14°F ˜ +140°F)
New Xceeder Chain for Your Operation
When your operation runs “clean,” when machines and conveyed materials must be free from contact with oil, or when lubrication is difficult, Xceeder Chain can extend the life of YOUR operation.
•
Outstanding performance in temperatures up to 302°F
•
Available in drive and conveyor chain sizes 40 to 100 to meet more application needs
•
Available in single and extended pitch attachments
Get Up and Running
Right Away
Maximize the efficiency of your existing system without costly design changes.
Xceeder Chain is interchangeable with ANSI standard chain and works with standard sprockets, so there’s no special setup or costly system reconfiguration required. You get the same maximum allowable loads as U.S. Tsubaki’s ANSI standard chain. And Xceeder Chain actually exceeds ANSI minimum tensile strength requirements.
Expectations
Xceeder™ Chain from U.S. Tsubaki
A Revolution in Lube-free Chain
Xceeder™ Single-Pitch Attachment Chain Selection Guidelines
Operating Temperatures: 14°F ~ 302°F°
Connecting Links: RS40CX – RS60CX are clip style RS80CX – RS100CX are cottered style
Use standard sprockets.
Single-Pitch Xceeder Chain Specifications units (in.)
Width Xceeder Xceeder Between Average Maximum Roller Link Roller Pin Link Plate Tensile Allowable Approx. Pitch Plates Diameter Strength Tension Weight Chain No. P W R D L1 L2 TH (lbs.) (lbs.) (lbs./ft.)
RS40CX 0.500 0.297 0.312 0.156 0.350 0.417 0.060 0.472 3,527 595 0.43
RS50CX 0.625 0.365 0.400 0.200 0.433 0.500 0.080 0.591 5,732 970 0.70
RS60CX 0.750 0.483 0.469 0.234 0.539 0.614 0.094 0.713 8,377 1,411 1.03
RS80CX 1.000 0.609 0.625 0.312 0.673 0.791 0.125 0.949 14,330 2,403 1.80
RS100CX 1.250 0.736 0.750 0.375 0.811 0.929 0.156 1.185 22,487 3,836 2.70
Additional Weight per Attachment (lbs.)
A & SA K & SK Chain No. C C1 NO S X X2 XS Att. Att.
RS40CX 0.500 0.500 0.375 0.141 0.315 0.724 0.701 0.685 0.004 0.009 RS50CX 0.626 0.626 0.500 0.205 0.406 0.949 0.921 0.907 0.007 0.013 RS60CX 0.750 0.720 0.626 0.205 0.469 1.144 1.110 1.057 0.015 0.031 RS80CX 1.000 0.969 0.752 0.268 0.625 1.476 1.441 1.396 0.029 0.057 RS100CX 1.250 1.252 1.000 0.342 0.780 1.795 1.768 1.732 0.057 0.115
Notes
1. Due to the felt seals, Xceeder Chain pin length is slightly longer than standard Attachment Chain from U.S. Tsubaki.
2.
The X dimension is longer on Xceeder Chain attachments than on standard Attachment Chain from U.S. Tsubaki. Please check dimensions to ensure that pin-head and bent attachment length will not interfere with the application.
Xceeder™ Extended-Pitch
Attachment Chain
Selection Guidelines
Operating Temperatures: 14°F ~ 302°F Standard "S" Roller Type
Connecting Links: RF2040CX – RF2060CX are clip style RF2080CX – RF2100CX are cottered style
Consult U.S. Tsubaki to locate compatible sprockets for your chain.
Oversize "R" Roller Type
AttachmentAttachment Attachment K-1Attachment
Attachment
AttachmentAttachmentAttachment
Extended-Pitch Xceeder Chain Specifications units (in.)
Width Xceeder Xceeder
Between Roller Average Maximum
Roller Link Diameter Pin Link Plate Tensile Allowable
Pitch Plates Strength Tension
Chain No. P W R R2 DL1 L2 TH (lbs.) (lbs.)
RF2040CX 1.000 0.313 0.312 0.625 0.156 0.350 0.417 0.060 0.472 3,527 595
RF2050CX 1.250 0.375 0.400 0.750 0.200 0.433 0.500 0.080 0.591 5,732 970
RF2060CX 1.500 0.500 0.469 0.875 0.235 0.600 0.675 0.125 0.677 8,377 1,410
RF2080CX 2.000 0.625 0.625 1.125 0.313 0.754 0.856 0.156 0.906 14,330 2,400
RF2100CX 2.500 0.750 0.750 1.563 0.376 0.890 0.996 0.187 1.126 22,487 3,840
Approx. Additional Weight Weight per Attachment (lbs./ft.) (lbs.) Small Large A & SA K & SK Chain No. C C1 C2 KN O O1 ST X X2 XS Roller Roller Att. Att.
RF2040CX 0.500 0.437 0.535 0.374 0.752 0.142 0.205 0.358 0.060 0.783 0.693 0.780 0.34 0.58 0.007 0.013 RF2050CX 0.626 0.563 0.626 0.469 0.937 0.205 0.268 0.437 0.080 0.978 0.866 0.969 0.56 0.87 0.013 0.026 RF2060CX 0.844 0.689 0.752 0.563 1.126 0.205 0.343 0.579 0.125 1.276 1.110 1.205 1.01 1.47 0.037 0.075 RF2080CX 1.094 0.874 1.000 0.752 1.500 0.268 0.406 0.752 0.157 1.638 1.441 1.594 1.63 2.38 0.071 0.141 RF2100CX 1.312 1.125 1.252 0.937 1.875 0.343 0.563 0.921 0.187 2.000 1.768 1.984 2.39 3.91 0.132 0.265
Notes
1.
Due to the felt seals, Xceeder Chain pin length is slightly longer than standard Attachment Chain from U.S. Tsubaki.
2.
The X dimension is longer on Xceeder Chain attachments than on standard Attachment Chain from U.S. Tsubaki. Please check dimensions to ensure that pin-head and bent attachment length will not interfere with the application.
Xceeder™
Selection Guidelines
Operating Temperatures: 14°F ~ 302°F
Connecting Links: RS40DX – RS60DX are clip style RS80DX – RS100DX are cottered style
Sizes RS40DX – RS100DX available in stock. Use standard sprockets.
Xceeder Drive Chain Specifications units (in.)
Chain No. Pitch P Roller Diameter R Width Between Roller Link Plates W T1 Link Plate T2 H h D Pin L1 L2
RS40DX 0.500 0.312 0.297 0.060 0.080 0.472 0.409 0.156 0.37 0.44
RS50DX 0.625 0.400 0.365 0.080 0.094 0.591 0.512 0.200 0.45 0.52
RS60DX 0.750 0.469 0.483 0.094 0.125 0.713 0.614 0.234 0.57 0.65
RS80DX 1.000 0.625 0.609 0.125 0.156 0.949 0.819 0.312 0.72 0.82
RS100DX 1.250 0.750 0.735 0.156 0.187 1.185 1.024 0.375 0.86 0.96
RS40DX Chain No. 3,125 ANSI Minimum Tensile Strength (lbs.) 4,250 Xceeder Avg. Tensile Strength (lbs.) 810 Xceeder Maximum Allowable Tension (lbs.) 0.47 Approx. Weight (lbs./ft.) 240 No. of Links/10 ft. 490 Allowable Speed (ft./min.)
RS50DX 4,880 7,050 1,430 0.75 192 442
RS60DX 7,030 9,900 1,990 1.16 160 393
RS80DX 12,500 17,600 3,300 1.86 120 295
RS100DX 19,530 26,400 5,060 2.89 96 262
Notes 1. Due to the felt seals, Xceeder Chain pin length is slightly longer than standard Attachment Chain from U.S. Tsubaki. 2. Offset links are not available for Xceeder Chain. Please order in even pitches. Please check dimensions to ensure that pin length will not interfere with the application.
6
Xceeder™ Chain
Horsepower Ratings
RS40 Drive Xceeder Chain RS50 Drive Xceeder Chain
No. of HORSEPOWER RATINGS No. of HORSEPOWER RATINGS
Teeth Teeth
MAXIMUM SPEED - SMALL SPROCKET (rpm) MAXIMUM SPEED - SMALL SPROCKET (rpm)
Small Small Sprocket 10 25 50 100 200 300 400 500 700 900 1000 1200 Sprocket 10 25 50 100 200 300 400 500 600 700 800 900
9 0.07 0.15 0.28 0.52 0.97 1.39 1.81 2.20 2.99 3.74 4.11 4.85 9
0.13 0.31 0.58 1.07 2.00 2.88 3.73 4.56 5.37 6.17 6.96 7.73 10
0.07 0.16 0.31 0.58 1.09 1.55 2.02 2.47 3.34 4.20 4.61 10
0.15
0.31 0.64 1.21 2.24 3.23 4.18 5.11 6.02 6.92 7.80 11
0.08 0.19 0.35 0.64 1.21 1.73 2.24 2.73 3.70 4.65 5.11 11
1.50
0.38 0.71 1.33 2.48 3.58 4.64 5.66 6.67 7.67
12
0.09 0.20 0.38 0.71 1.31 1.90 2.47 3.00 4.07 5.11 12
0.19 0.42 0.78 1.46 2.72 3.93 5.09 6.22 7.33 8.42
13
0.09 0.23 0.42 0.76 1.43 2.06 2.68 3.28 4.44 5.56 13
0.02 0.46 0.86 1.59 2.98 4.28 5.55 6.78 7.99
14
0.11 0.24 0.44 0.83 1.55 2.24 2.91 3.55 4.81 14
0.21 0.50 0.92 1.73 3.22 4.64 6.00 7.34 8.66
15
0.11 0.25 0.48 0.90 1.68 2.41 3.14 3.83 5.19 15
0.23 0.54 0.99 1.86 3.47 5.00 6.47 7.92
16
0.12 0.28 0.52 0.97 1.80 2.59 3.35 4.10 5.55 16
0.25 0.58 1.07 2.00 3.73 5.36 6.94 8.48
17
0.13 0.29 0.55 1.03 1.92 2.76 3.58 4.38 17
0.27 0.62 1.14 2.13 3.97 5.72 7.41 9.06
18
0.13 0.31 0.59 1.10 2.04 2.95 3.81 4.66 18
0.28 0.66 1.22 2.27 4.22 6.08 7.88
19
0.15 0.34 0.62 1.17 2.17 3.12 4.05 4.95 19
0.31 0.68 1.29 2.40 4.48 6.45 8.36
20
0.16 0.35 0.66 1.23 2.29 3.30 4.28 5.23 20
0.32 0.72 1.35 2.53 4.73 6.82 8.83
21
0.16 0.38 0.70 1.29 2.41 3.47 4.50 5.51 21
0.34 0.76 1.43 2.68 4.99 7.18 9.32
22
0.17 0.39 0.72 1.35 2.53 3.66 4.73 5.79 22
0.35 0.80 1.50 2.81 5.24 7.56
23
0.17 0.42 0.76 1.42 2.67 3.83 4.97 6.07 23
0.38 0.84 1.58 2.95 5.51 7.93
24
0.19 0.43 0.80 1.49 2.79 4.02 5.20 24
0.39 0.88 1.66 3.08 5.76 8.30
25
0.20 0.44 0.83 1.55 2.91 4.20 5.44 25
0.40 0.92 1.73 3.23 6.02 8.67
26
0.20 0.47 0.87 1.62 3.04 4.38 5.67 26
0.43 0.97 1.81 3.36 6.29 9.05
28
0.23 0.51 0.95 1.77 3.30 4.74 6.14 28
0.46 1.05 1.96 3.65 6.81 9.81
30
0.24 0.55 1.02 1.90 3.55 5.11 30
0.50 1.13 2.10 3.93 7.33
32
0.25 0.59 1.09 2.04 3.81 5.48 32
0.54 1.21 2.27 4.21 7.87
35
0.28 0.64 1.21 2.24 4.20 6.03 35
0.59 1.33 2.49 4.64 8.66
40
0.32 0.75 1.39 2.59 4.84 40
0.67 1.54 2.87 5.36 10.01
45
0.38 0.84 1.58 2.95 5.50 45 0.76 1.74 3.27 6.08
RS60 Drive Xceeder Chain RS80 Drive Xceeder Chain
No. of HORSEPOWER RATINGS No. of HORSEPOWER RATINGS
Teeth Teeth
MAXIMUM SPEED - SMALL SPROCKET (rpm) MAXIMUM SPEED - SMALL SPROCKET (rpm)
Small Small
Sprocket 10 25 50 100 150 200 250 300 400 500 600 700 Sprocket 10 25 50 75 100 125 150 200 250 300 350
9 0.24 0.55 1.02 1.89 2.72 3.52 4.32 5.08 6.59 8.06 9.49 10.91 9
0.54 1.22 2.27 3.27 4.24 5.17 6.10 7.91 9.66 11.39 13.08 10
0.27 0.60 1.14 2.12 3.06 3.95 4.84 5.70 7.39 9.02 10.64 10
0.60 1.37 2.55 3.66 4.74 5.80 6.84 8.86 10.83 12.76 14.61 11
0.29 0.67 1.26 2.35 3.39 4.38 5.36 6.31 8.19 10.00 11
0.66 1.51 2.81 4.06 5.27 6.43 7.57 9.82 12.01 14.21
12
0.32 0.74 1.38 2.59 3.71 4.81 5.88 6.94 8.99 10.99 12
0.72 1.66 3.10 4.46 5.78 7.06 8.32 10.79 13.19
13
0.35 0.80 1.51 2.81 4.06 5.25 6.42 7.57 9.80 13
0.79 1.81 3.38 4.87 6.30 7.71 9.07 11.75 14.34
14
0.39 0.87 1.64 3.06 4.40 5.70 6.96 8.20 10.62 14
0.86 1.96 3.66 5.27 6.82 8.35 9.84 12.75 15.55
15
0.42 0.94 1.76 3.28 4.73 6.13 7.49 8.83 11.45 15
0.92 2.12 3.94 5.68 7.36 8.99 10.59 13.67
16
0.44 1.01 1.89 3.52 5.08 6.57 8.04 9.46 16
0.99
2.27 4.22 6.08 7.88 9.64 11.37 14.74
17
0.47 1.09 2.01 3.77 5.41 7.02 8.58 10.11 17
1.06
2.41 4.52 6.50 8.42 10.29 12.13 15.68
18
0.51 1.15 2.14 3.99 5.76 7.47 9.13 10.75 18
1.13
2.57 4.80 6.92 8.95 10.95 12.91
19
0.54 1.22 2.28 4.24 6.11 7.91 9.68 11.41 19
1.19
2.72 5.09 7.33 9.49 11.61 13.67
20
0.56 1.29 2.40 4.48 6.46 8.36 10.23 12.05 20
1.26
2.88 5.37 7.75 10.04 12.26 14.48
21
0.59 1.35 2.53 4.73 6.81 8.82 10.78 21
1.33
3.04 5.67 8.16 10.57 12.93 15.28
22
0.63 1.42 2.67 4.97 7.16 9.27 11.34 22
1.39
3.19 5.96 8.59 11.12 13.54 16.08
23
0.66 1.50 2.79 5.21 7.51 9.73 11.89 23
1.47
3.35 6.26 9.01 11.67 14.21 16.75
24
0.68 1.57 2.92 5.46 7.87 10.19 12.45 24
1.54
3.51 6.55 9.44 12.22 14.88
25
0.72 1.64 3.06 5.71 8.22 10.64 13.01 25
1.61
3.67 6.85 9.85 12.77 15.55
26
0.75 1.72 3.19 5.95 8.58 11.11 26
1.68
3.82 7.14 10.28 13.32 16.35
28
0.82 1.85 3.46 6.45 9.29 12.04 28
1.82
4.14 7.73 11.14 14.48 17.69
30
0.87 2.00 3.73 6.94 10.00 12.96 30
1.96 4.46 8.34 12.01 15.55
32
0.94 2.14 3.99 7.45 10.72 32
2.10
4.78 8.94 12.87 16.62
35
1.03 2.36 4.40 8.20 11.82 35
2.32
5.28 9.84 14.21 18.36
40
1.19 2.72 5.08 9.48 13.67 40
2.67 6.10 11.37 16.35
45
1.35 3.10 5.76 10.76 45 3.03 6.92 12.91 18.63
RS100 Drive Xceeder Chain
No. of HORSEPOWER RATINGS
Teeth MAXIMUM SPEED - SMALL SPROCKET (rpm)
Small Sprocket 10 25 50 75 100 125 150 175 200 225 250 275
9
0.88 2.02 3.78 5.46 7.06 8.63 10.17 11.69 13.18 14.61 16.08 17.56 10
0.99
2.28 4.24 6.11 7.91 9.68 11.39 13.09 14.74 16.35 18.09 11
1.10
2.52 4.70 6.77 8.77 10.72 12.63 14.48 16.35 18.23
12
1.21 2.76 5.16 7.44 9.64 11.78 13.94 15.95 17.96
13
1.33 3.02 5.63 8.11 10.51 12.84 15.15 17.42
14
1.43 3.27 6.10 8.78 11.38 13.94 16.35 18.76
15
1.54 3.52 6.57 9.46 12.26 15.01 17.69
16
1.65 3.78 7.05 10.15 13.15 16.08 18.90
17
1.77 4.03 7.52 10.83 14.07 17.16
18
1.88
4.29 8.00 11.53 14.88 18.23
19
2.00
5.21 8.48 12.21 15.82 19.30
20
2.10 4.80 8.97 12.91 16.75 20.51
21
2.22 5.07 9.45 13.67 17.69
22
2.33 5.32 9.93 14.34 18.50
23
2.45 5.59 10.43 15.01 19.43
24
2.56 5.84 10.91 15.68 20.37
25
2.68 6.11 11.41 16.49 21.31
26
2.80
6.38 11.90 17.16
28
3.03
6.90 12.89 18.63
30
3.26 7.44 13.94 19.97
32
3.50 7.97 14.88 21.44
35
3.86
8.79 16.35
40
4.45
10.16 18.90
45
5.05 11.53 21.58
Exceed Your Expectations
Now save even more time and money with the longest-lasting lube-free chain.
• Extend wear life
•
Lower maintenance costs
•
Increase productivity
