Warner Linear: Linear Guideways

Download (PDF, 1.75MB)

Linear Guideways

Page 1 Introduction Pages 2 - 3 Features Page 4 - 5 Applications
Page 6 - 10
ATH Series
Page 11 - 15

ATE Series
Page 16 - 19

ATM Series
Warner Linear Guideways Selection Guide
Type Shape
Square ATH

4-Row

Square ATE

4-Row

Narrow ATMN

2-Row

Page 20 - 21 ATH E2 Self-Lubricating
Model

Page 22 Options & Accessories
Page 23 Conversions/Glossary

Page 24 Request For Quote Form
Rail Length
Shape Height

(mm)

Flange ATH

Square Square Warner Linear 100-4000

28-90 Guideways Flange Flange lead the industry.
100-4000

24-90
Our guideway assemblies are designed for high accuracy, large capacity,
Flange ATE

Square Square 24-42 100-4000
Flange Flange 100-4000
24-42
Wide ATMW

Square Square 24-42 40-1200
Flange Flange 24-42 50-1000
high reliability, and excellent operating characteristics. The patented recirculation system provides smooth linear motion with low noise.

World-class linear guideways from
Warner Linear are engineered for long-lasting,
trouble-free performance.

Our guideways are loaded with features that provide reliability in high speed, high accuracy applications. Low friction design allows for smooth operation and low noise. Fully Interchangeable rails and easy installation help to make Warner Linear guideways the preferred choice of both OEM’s and end users.
Tapped and threaded holes are referenced to mounting surface. Wide blocks can be mounted from either top or bottom.
End Seals provide protection from ambient
contamination. Optional double seals and
scrapers can provide added protection.

Precisely located mounting holes allow for ease of rail mounting. Top or bottom mounting available.
Grease fitting can be mounted at either end of the block.
Clearly marked blocks provide reference surface to ensure accurate installation and operation.
Sealed bearing blocks provide low friction, accurate, quiet, smooth operation in designs that are easy to install and mount properly.
End cap provides lubrication retention and low noise bearing re-circulation.
Rails provide accurate straightness and parallelism with pre-located mounting holes.
Reference surface for rails is provided on both sides of the rails for ease of reference access regardless of mounting location.

A full range of models is available to meet your specific application requirements.
Warner Linear offers specific guideways for use with super heavy, heavy, medium, or light loads. Choose from various levels of precision and dust protection.

ATH Series
Designed for heavy and super heavy loads.
• Machine Centers
• NC Lathes
• Grinding Machines
• Precision Machining Centers
• Heavy Cutting Machines
• Automation Devices
• Transportation Equipment
• Measuring Equipment
• Devices Requiring High Positional Accuracy

ATE Series

Designed for medium and heavy loads.
• Automation Equipment
• High Speed Transportation Equipment
• Precision Measuring Equipment
• Semiconductor Equipment
• Woodworking Machinery
• Packaging Machinery

ATM Series

Designed for light loads.
• Miniature Devices
• Medical Equipment
• IC Manufacturing Equipment
• Woodworking Machinery
• X-Y Tables
• Packaging Machinery

5

ATH Series
ATH Series Interchangeable Block ATH Series provides 4-row heavy load capability for applications which require high accuracy and rigidity. Typical Applications
• Machine Centers • NC Lathes • Grinding Machines • Precision Machining Centers • Heavy Cutting Machines • Automation Devices • Transportation Equipment • Measuring Equipment • Devices Requiring High Positional Accuracy
Preload A standard preload is provided in all units that will limit clearance between the block and the rail. This will create drag between 0 and 2% of the C rating of the system. For increased preload values, consult factory.

Ordering Number System for ATH Models Example: ATH-F-35HT-XXXX-B

ATH Series Rail Mounting
Warner Linear has offered the standard length of rails for customer needs. As for the non-standard E value, to avoid the unstable end part of rail, it is recommended the E value should not be over 1/2 of pitch (P). On the other hand, the E value should not be less than the Emin due to the breaking of mounting hole.

L = (n - 1) x P + 2 x E
L: Total length of rail (mm)
n: Number of mounting holes
P: Distance between any two holes (mm)

E: Distance from the center of the last hole to the edge (mm)
Unit: mm

Item ATH15 ATH20 ATH25 ATH30 ATH35 ATH45 ATH55 ATH65
Std. Length L(n) 160 (3) 220 (4) 220 (4) 280 (4) 280 (4) 570 (6) 780 (7) 1,270 (9)
220 (4) 280 (5) 280 (5) 440 (6) 440 (6) 885 (9) 1,020 (9) 1,570 (11)
280 (5) 340 (6) 340 (6) 600 (8) 600 (8) 1,200 (12) 1,260 (11) 2,020 (14)
340 (6) 460 (8) 460 (8) 760 (10) 760 (10) 1,620 (16) 1,500 (13) 2,620 (18)
460 (8) 640 (11) 640 (11) 1,000 (13) 1,000 (13) 2,040 (20) 1,980 (17)
640 (11) 820 (14) 820 (14) 1,640 (21) 1,640 (21) 2,460 (24) 2,580 (22)
820 (14) 1,000 (17) 1,000 (17) 2,040 (26) 2,040 (26) 2,985 (29) 2,940 (25)
1,240 (21) 1,240 (21) 2,520 (32) 2,520 (32)
1,600 (27) 3,000 (38) 3,000 (38)
Pitch (P) 60 60 60 80 80 105 120 150
Distance to End (ES) 20 20 20 20 20 22.5 30 35
Max. Std. Length 1,960 (33) 4,000 (67) 4,000 (67) 3,960 (50) 3,960 (50) 3,930 (38) 3,900 (32) 3,970 (26)
Max. Length 2,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000

Note: 1. Tolerance of E value for standard rail is 0.5~-0.5 mm. Tolerance of E value for butt-joint is 0~-0.3 mm.
2. Maximum standard length means the max. rail length with standard E value on both sides.
3.If different E value is needed, please contact Warner Linear.

ATH-S-HT/ATH-S-ST Type
G
L

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G M x l T H2 H3 WR HR D h d E
ATH-S-15HT 28 4.3 9.5 34 26 4 26 39.4 61.4 5.3 M4x5 6 8.5 9.5 15 15 7.5 5.3 4.5 20
ATH-S-20HT ATH-S-20ST 30 4.6 12 44 32 6 36 50 50.5 65.2 75.6 90.3 12 M5x6 8 6 7 20 17.5 9.5 8.5 6 20
ATH-S-25HT ATH-S-25ST 40 5.5 12.5 48 35 6.5 35 50 58 78.6 83 103.6 12 M6x8 8 10 13 23 22 11 9 7 20
ATH-S-30HT ATH-S-30ST 45 6 16 60 40 10 40 60 70 93 97.4 120.4 12 M8x10 8.5 9.5 13.8 28 26 14 12 9 20
ATH-S-35HT ATH-S-35ST 55 7.5 18 70 50 10 50 72 80 105.8 112.4 138.2 12 M8x12 10.2 16 19.6 34 29 14 12 9 20
ATH-S-45HT ATH-S-45ST 70 9.5 20.5 86 60 13 60 80 97 128.8 138 169.8 12.9 M10x17 16 18.5 30.5 45 38 20 17 14 22.5
ATH-S-55HT ATH-S-55ST 80 13 23.5 100 75 12.5 75 95 117.7 155.8 165.7 203.8 12.9 M12x18 17.5 22 29 53 44 23 20 16 30
ATH-S-65HT ATH-S-65ST 90 15 31.5 126 76 25 70 120 144.2 203.6 198.2 257.6 12.9 M16x20 25 15 15 63 53 26 22 18 35

Note: 1kgf=9.81N

Model No. Mounting Bolt for Rail (mm) Basic Dynamic Load Rating C (kN) Basic Static Load Rating CO (kN) Static Rated Moment Weight
MR (kN-m) MP (kN-m) MY (kN-m) Block (kg) Rail (kg/m)
ATH-S-15HT M4x16 11.38 25.31 0.17 0.15 0.15 0.18 1.45
ATH-S-20HT ATH-S-20ST M5x16 17.75 21.18 37.84 48.84 0.38 0.48 0.27 0.47 0.27 0.47 0.30 0.39 2.21
ATH-S-25HT ATH-S-25ST M6x20 26.48 32.75 56.19 76.00 0.64 0.87 0.51 0.88 0.51 0.88 0.51 0.69 3.21
ATH-S-30HT ATH-S-30ST M8x25 38.74 47.27 83.06 110.13 1.06 1.40 0.85 1.47 0.85 1.47 0.88 1.16 4.47
ATH-S-35HT ATH-S-35ST M8x25 49.52 60.21 102.87 136.31 1.73 2.29 1.20 2.08 1.20 2.08 1.45 1.92 6.30
ATH-S-45HT ATH-S-45ST M12x35 77.57 94.54 155.93 207.12 3.01 4.00 2.35 4.07 2.35 4.07 2.73 3.61 10.41
ATH-S-55HT ATH-S-55ST M14x45 114.44 139.35 227.81 301.26 5.66 7.49 4.06 7.01 4.06 7.01 4.17 5.49 15.08
ATH-S-65HT ATH-S-65ST M16x50 163.63 208.36 324.71 457.15 10.02 14.15 6.44 11.12 6.44 11.12 7.00 9.82 21.18

MR

MP

ATH-F-H/ATH-F-S Type
G
L

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G M T T1 H2 H3 WR HR D h d P E
ATH-F-15H 24 4.3 16 47 38 4.5 30 39.4 61.4 5.3 M5 6 8.9 4.5 5.5 15 15 7.5 5.3 4.5 60 20
ATH-F-20H ATH-F-20S 30 4.6 21.5 63 53 5 40 50.5 65.2 75.6 90.3 12 M6 8 10 6 7 20 17.5 9.5 8.5 6 60 20
ATH-F-25H ATH-F-25S 36 5.5 23.5 70 57 6.5 45 58 78.6 83 103.6 12 M8 8 14 6 9 23 22 11 9 7 60 20
ATH-F-30H ATH-F-30S 42 6 31 90 72 9 52 70 93 97.4 120.4 12 M10 8.5 16 6.5 10.8 28 26 14 12 9 80 20
ATH-F-35H ATH-F-35S 48 7.5 33 100 82 9 62 80 105.8 112.4 138.2 12 M10 10.1 18 9 12.6 34 29 14 12 9 80 20
ATH-F-45H ATH-F-45S 60 9.5 37.5 120 100 10 80 97 128.8 138 169.8 12.9 M12 15.1 22 8.5 20.5 45 38 20 17 14 105 22.2
ATH-F-55H ATH-F-55S 70 13 43.5 140 116 12 95 117.7 155.8 165.7 203.8 12.9 M14 17.5 26.5 12 19 53 44 23 20 16 120 30
ATH-F-65H ATH-F-65S 90 15 53.5 170 142 14 110 144.2 203.6 198.2 257.6 12.9 M16 25 37.5 15 15 63 53 26 22 18 150 35

Note: 1kgf=9.81N
MR

MP

Model No. Mounting Bolt for Rail (mm) Basic Dynamic Load Rating C (kN) Basic Static Load Rating CO (kN) Static Rated Moment Weight
MR (kN-m) MP (kN-m) MY (kN-m) Block (kg) Rail (kg/m)
ATH-F-15H M4x16 11.38 25.31 0.17 0.15 0.15 0.17 1.45
ATH-F-20H ATH-F-20S M5x16 17.75 21.18 37.84 48.84 0.38 0.48 0.27 0.47 0.27 0.47 0.40 0.52 2.21
ATH-F-25H ATH-F-25S M6x20 26.48 32.75 56.19 76.00 0.64 0.87 0.51 0.88 0.51 0.88 0.59 0.80 3.21
ATH-F-30H ATH-F-30S M8x25 38.74 47.27 83.06 110.13 1.06 1.40 0.85 1.47 0.85 1.47 1.09 1.44 4.47
ATH-F-35H ATH-F-35S M8x25 49.52 60.21 102.87 136.31 1.73 2.29 1.20 2.08 1.20 2.08 1.56 2.06 6.30
ATH-F-45H ATH-F-45S M12x35 77.57 94.54 155.93 207.12 3.01 4.00 2.35 4.07 2.35 4.07 2.79 3.69 10.41
ATH-F-55H ATH-F-55S M14x45 114.44 139.35 227.81 301.26 5.66 7.49 4.06 7.01 4.06 7.01 4.52 5.96 15.08
ATH-F-65H ATH-F-65S M16x50 163.63 208.36 324.71 457.15 10.02 14.15 6.44 11.12 6.44 11.12 9.17 12.89 21.18

H

ATH-F-H/ATH-F-S Type
GL
W

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G M T T1 T2 H2 H3 WR HR D h d P E
ATH-F-15H 24 4.3 16 47 38 4.5 30 39.4 61.4 5.3 M5 6 8.9 6.95 4.5 5.5 15 15 7.5 5.3 4.5 60 20
ATH-F-20H ATH-F-20S 30 4.6 21.5 63 53 5 40 50.5 65.2 75.6 90.3 12 M6 8 10 9.5 6 7 20 17.5 9.5 8.5 6 60 20
ATH-F-25H ATH-F-25S 36 5.5 23.5 70 57 6.5 45 58 78.6 83 103.6 12 M8 8 14 10 6 9 23 22 11 9 7 60 20
ATH-F-30H ATH-F-30S 42 6 31 90 72 9 52 70 93 97.4 120.4 12 M10 8.5 16 10 6.5 10.8 28 26 14 12 9 80 20
ATH-F-35H ATH-F-35S 48 7.5 33 100 82 9 62 80 105.8 112.4 138.2 12 M10 10.1 18 13 9 12.6 34 29 14 12 9 80 20
ATH-F-45H ATH-F-45S 60 9.5 37.5 120 100 10 80 97 128.8 138 169.8 12.9 M12 15.1 22 15 8.5 20.5 45 38 20 17 14 105 22.5
ATH-F-55H ATH-F-55S 70 13 43.5 140 116 12 95 117.7 155.8 165.7 203.8 12.9 M14 17.5 26.5 17 12 19 53 44 23 20 16 120 30
ATH-F-65H ATH-F-65S 90 15 53.5 170 142 14 110 144.2 203.6 198.2 257.6 12.9 M16 25 37.5 23 15 15 63 53 26 22 18 150 35

Note: 1kgf=9.81N

Model No. Mounting Bolt for Rail (mm) Basic Dynamic Load Rating C (kN) Basic Static Load Rating CO (kN) Static Rated Moment Weight
MR (kN-m) MP (kN-m) MY (kN-m) Block (kg) Rail (kg/m)
ATH-F-15H M4x16 11.38 25.31 0.17 0.15 0.15 0.17 1.45
ATH-F-20H ATH-F-20S M5x16 17.75 21.18 37.84 48.84 0.38 0.48 0.27 0.47 0.27 0.47 0.40 0.52 2.21
ATH-F-25H ATH-F-25S M6x20 26.48 32.75 56.19 76.00 0.64 0.87 0.51 0.88 0.51 0.88 0.59 0.80 3.21
ATH-F-30H ATH-F-30S M8x25 38.74 47.27 83.06 110.13 1.06 1.40 0.85 1.47 0.85 1.47 1.09 1.44 4.47
ATH-F-35H ATH-F-35S M8x25 49.52 60.21 102.87 136.31 1.73 2.29 1.20 2.08 1.20 2.08 1.56 2.06 6.30
ATH-F-45H ATH-F-45S M12x35 77.57 94.54 155.93 207.12 3.01 4.00 2.35 4.07 2.35 4.07 2.79 3.69 10.41
ATH-F-55H ATH-F-55S M14x45 114.44 139.35 227.81 301.26 5.66 7.49 4.06 7.01 4.06 7.01 4.52 5.96 15.08
ATH-F-65H ATH-F-65S M16x50 163.63 208.36 324.71 457.15 10.02 14.15 6.44 11.12 6.44 11.12 9.17 12.89 21.18

MR

MP

• Automation Equipment
ATE Series
• High Speed Transportation Equipment Interchangeable Block

11

ATE Series Rail Mounting
Warner Linear has stock for standard length of rails. If non-standard length is required, it is recommended the E value should not be over 1/2 of pitch (P) to avoid instability on the end part of rail, and not be less than Emin due to the possibility of the mounting hold broken.

L = (n - 1) x P + 2 x E
L: Total length of rail (mm)
n: Number of mounting holes
P: Distance between any two holes (mm)
E: Distance from the center of the last hole to the edge (mm)
Unit: mm

Item ATE15 ATE20 ATE25 ATE30
160 (3) 220 (4) 220 (4) 280 (4)
Std. Length L(n) 220 (4) 280 (5) 280 (5) 440 (6)
280 (5) 340 (6) 340 (6) 600 (8)
340 (6) 460 (8) 460 (8) 760 (10)
460 (8) 640 (11) 640 (11) 1,000 (13)
640 (11) 820 (14) 820 (14) 1,640 (21)
820 (14) 1,000 (17) 1,000 (17) 2,040 (26)
1,240 (11) 2,520 (32) 2,520 (32)
3,000 (38) 3,000 (38)
Pitch (P) 60 60 60 80
Distance to End (ES) 20 20 20 20
Max. Std. Length 1,960 (33) 4,000 (67) 4,000 (67) 3,960 (50)
Max. Length 2,000 4,000 4,000 4,000

Note: 1. Tolerance of E value for standard rail is 0.5~-0.5 mm. Tolerance of E value for butt-joint is 0~-0.3 mm.
2. Maximum standard length means the max. rail length with standard E value on both sides.
3. If different E value is needed, please contact Warner Linear.

ATES-MT/ATES-HT Type
G
L

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G M x l T H2 WR HR D h d P E
ATES-15MT ATES-15HT 24 4.5 9.5 34 26 4 – 26 23.1 39.8 40.7 57.4 5.7 M4x6 6 5.5 15 12.5 6 4.5 3.5 60 20
ATES-20MT ATES-20HT 28 6 11 42 32 5 – 32 29 48.1 50.6 69.7 12 M5x7 7.5 6 20 15.5 9.5 8.5 6 60 20
ATES-25MT ATES-25HT 33 7 12.5 48 35 6.5 – 35 35.5 59 61.1 84.6 12 M6x9 8 8 23 18 11 9 7 60 20
ATES-30MT ATES-30HT 42 10 16 60 40 10 – 40 41.5 70.1 71.5 100.1 12 M8x12 9 8 28 23 11 9 7 80 20

ATES-15MT ATES-15HT M3x16 440 640 590 1,010 0.08 0.13 0.04 0.10 0.04 0.10 0.09 0.15 1.25
ATES-20MT ATES-20HT M5x16 650 970 920 1,450 0.13 0.22 0.06 0.16 0.06 0.16 0.15 0.24 2.08
ATES-25MT ATES-25HT M6x20 1,080 1,550 1,330 2,290 0.23 0.38 0.12 0.32 0.12 0.32 0.25 0.41 2.67
ATES-30MT ATES-30HT M6x25 1,550 2,470 2,030 3,390 0.40 0.68 0.21 0.55 0.21 0.55 0.45 0.76 4.35

MR
MP

ATEF-MT/ATEF-HT Type
G
L

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G M T H2 WR HR D h d P E
ATEF-15MT ATEF-15HT 24 4.5 18.5 52 41 5.5 – 26 23.1 39.8 40.7 57.4 5.7 M5 7 5.5 15 12.5 6 4.5 3.5 60 20
ATEF-20MT ATEF-20HT 28 6 19.5 59 49 5 – 32 29 48.1 50.6 69.7 12 M6 9 6 20 15.5 9.5 8.5 6 60 20
ATEF-25MT ATEF-25HT 33 7 25 73 60 6.5 – 35 35.5 59 61.1 84.6 12 M8 10 8 23 18 11 9 7 60 20
ATEF-30MT ATEF-30HT 42 10 31 90 72 9 – 40 41.5 70.1 71.5 100.1 12 M10 10 8 28 23 11 9 7 80 20

ATEF-15MT ATEF-15HT M3x16 440 640 590 1,010 0.08 0.13 0.04 0.10 0.04 0.10 0.12 0.21 1.25
ATEF-20MT ATEF-20HT M5x16 650 970 920 1,450 0.13 0.22 0.06 0.16 0.06 0.16 0.19 0.32 2.08
ATEF-25MT ATEF-25HT M6x20 1,080 1,550 1,330 2,290 0.23 0.38 0.12 0.32 0.12 0.32 0.35 0.59 2.67
ATEF-30MT ATEF-30HT M6x25 1,550 2,470 2,030 3,390 0.40 0.58 0.21 0.55 0.21 0.55 0.62 1.04 4.35

MR
MP

ATES-MB/ATES-HB Type

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G M T H2 WR HR D h d P E
ATES-15MB ATES-15HB 24 4.5 18.5 52 41 5.5 – 26 23.1 39.8 40.7 57.4 5.7 ø4.5 7 5.5 15 12.5 6 4.5 3.5 60 20
ATES-20MB ATES-20HB 28 6 19.5 59 49 5 – 32 29 48.1 50.6 69.7 12 ø5.5 9 6 20 15.5 9.5 8.5 6 60 20
ATES-25MB ATES-25HB 33 7 25 73 60 6.5 – 35 35.5 59 61.1 84.6 12 ø7 10 8 23 18 11 9 7 60 20
ATES-30MB ATES-30HB 42 10 31 90 72 9 – 40 41.5 70.1 71.5 100.1 12 ø9 10 8 28 23 11 9 7 80 20

ATES-15MB ATES-15HB M3x16 440 640 590 1,010 0.08 0.13 0.04 0.10 0.04 0.10 0.12 0.21 1.25
ATES-20MB ATES-20HB M5x16 650 970 920 1,450 0.13 0.22 0.06 0.16 0.06 0.16 0.19 0.32 2.08
ATES-25MB ATES-25HB M6x20 1,080 1,550 1,330 2,290 0.23 0.38 0.12 0.32 0.12 0.32 0.35 0.59 2.67
ATES-30MB ATES-30HB M6x25 1,550 2,470 2,030 3,390 0.40 0.68 0.21 0.55 0.21 0.55 0.62 1.04 4.35

MR
MP

Ordering Number System for ATM Models Example: ATMN-S-7-XXXX

16

ATM Series Rail Mounting
Warner Linear has stock of standard length of rails. If non-standard length is required, it is recommended the E value should not be over 1/2 of pitch (P) to avoid instability on the end part of the rail, and not be less than Emin due to the possibility of the mounting hold broken.

Unit: mm

Item ATMN7 ATMN9 ATMN12 ATMN15 ATMW7 ATMW9 ATMW12 ATMW15
Std. Length L(n) 40 (3) 55 (3) 70 (3) 70 (2) 80 (3) 80 (3) 110 (3) 110 (3)
55 (4) 75 (4) 95 (4) 110 (3) 110 (4) 110 (4) 150 (4) 150 (4)
70 (5) 95 (5) 120 (5) 150 (4) 140 (5) 140 (5) 190 (5) 190 (5)
85 (6) 115 (6) 145 (6) 190 (5) 170 (6) 170 (6) 230 (6) 230 (6)
100 (7) 135 (7) 170 (7) 230 (6) 200 (7) 200 (7) 270 (7) 270 (7)
130 (9) 155 (8) 195 (8) 270 (7) 260 (9) 230 (8) 310 (8) 310 (8)
175 (9) 220 (9) 310 (8) 260 (9) 350 (9) 350 (9)
195 (10) 245 (10) 350 (9) 290 (10) 390 (10) 390 (10)
275 (14) 270 (11) 390 (10) 350 (14) 430 (11) 430 (11)
375 (19) 320 (13) 430 (11) 500 (19) 510 (13) 510 (13)
370 (15) 470 (12) 710 (24) 590 (15) 590 (15)
470 (19) 550 (14) 860 (29) 750 (19) 750 (19)
570 (23) 670 (17) 910 (23) 910 (23)
695 (28) 870 (22) 1,070 (27) 1,070 (27)
Pitch (P) 15 20 25 40 30 30 40 40
Distance to End (ES) 5 7.5 10 15 10 10 15 15
Max. Std. Length 595 (40) 995 (40) 995 (40) 990 (25) 590 (20) 980 (33) 1,150 (29) 1,150 (29)
Max. Length 600 1,000 1,000 1,000 1,000 1,000 1,200 1,200
Note: 1. Tolerance of E value for standard rail is 0.5~-0.5 mm. Tolerance of E value for butt-joint is 0~-0.3 mm.
2. Maximum standard length means the max. rail length with standard E value on both sides.
3. If different E value is needed, please contact Warner Linear.

ATMN-S/ATMN-L Type
L
W

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G Gn M x l H2 WR HR D h d P E
ATMN-7S ATMN-7L 8 1.5 5 17 12 2.5 8 13 13.5 21.8 22.5 30.8 – ø0.8 M2x2.5 1.5 7 4.8 4.2 2.3 2.4 15 5
ATMN-9S ATMN-9L 10 2 5.5 20 15 2.5 10 16 18.9 29.9 28.9 39.9 – ø0.8 M3x3 1.8 9 6.5 6 3.5 3.5 20 7.5
ATMN-12S ATMN-12L 13 3 7.5 27 20 3.5 15 20 21.7 32.4 34.7 45.4 – ø0.8 M3x3.5 2.5 12 8 6 4.5 3.5 25 10
ATMN-15S ATMN-15L 16 4 8.5 32 25 3.5 20 25 26.7 43.4 42.1 58.8 4.5 GN3S M3x4 3 15 10 6 4.5 3.5 40 15

MR

ATMN-7S ATMN-7L M2x6 100 140
ATMN-9S ATMN-9L M3x8 190 260
ATMN-12S ATMN-12L M3x8 290 380
ATMN-15S ATMN-15L M3x10 470 650

127 0.48 0.29 0.29 10
200 0.78 0.49 0.49 15
260 1.2 0.75 0.75 16
410 2 1.9 1.9 26
400 2.6 1.4 1.4 34
600 3.9 3.7 3.7 54
570 4.6 2.2 2.2 59
930 7.5 5.9 5.9 92

MP
0.22
0.38
0.65
1.06

ATMW-S/ATMW-L Type
L

Model No. Dimensions of Assembly (mm) Dimensions of Block (mm) Dimensions of Rail (mm)
H H1 N W B B1 C L1 L G Gn M x l H2 WR WB HR D h d P E
ATMW-7S ATMW-7L 9 1.9 5.5 25 19 3 10 19 21 30.8 31.2 41 – ø0.9 M3x3 1.85 14 – 5.2 6 3.2 3.5 30 10
ATMW-9S ATMW-9L 12 2.9 6 30 21 23 4.5 3.5 12 24 27.5 38.5 39.3 50.7 – ø1.0 M3x3 2.4 18 – 7 6 4.5 3.5 30 10
ATMW-12S ATMW-12L 14 3.4 8 40 28 6 15 28 31.3 45.6 46.1 60.4 – ø1.8 M3x3.6 2.8 24 – 8.5 8 4.5 4.5 40 15
ATMW-15S ATMW-15L 16 3.4 9 60 45 7.5 20 35 38 57 54.8 73.8 5.2 GN3S M4x4.2 3.2 42 23 9.5 8 4.5 4.5 40 15

MR

MP

ATMW-7S
ATMW-7L
ATMW-9S
ATMW-9L
ATMW-12S
ATMW-12L
ATMW-15S
ATMW-15L

M3x6
M3x8
M4x8
M4x10

140 180 280 350 400 520 690 910
210 320 420 600 570 840 940 1410 1.6
2.39
4.09
5.56
7.17
10.47
20.32
30.48 0.73
1.58
1.93
3.47
2.83
5.85
5.78
12.85
0.73
20
0.51
1.58
29
1.93
40
0.91
3.47
57
2.83
71
1.49
5.85
103
5.78
143
2.86
12.85
215

The configuration of the ATH E2 linear guideway is shown at left. The self-lubricant apparatus contains a filled oil tank. The oil is dispensed on the rail to form a lubricating oil film.
The self-lubricating blocks work in all block mounting configurations. Configuration of the self-lubricant apparatus
• Oil tank • Lubricant part
• Tank cover • Rubber plug
• Transmitted part • Oil

E1: Economy First & Ecology First (patent pending)

Features
• Cost reduction: Saves cost by reducing oil usage and maintenance.
Item Force Lubricant E1 (Self-lubricant) Block
Lubricant device $XXX —
Design and installation of lubricant device $XXX —
Cost of oil purchase 0.3cc/hr x 8 hrs/day x 280 days/year x 5 year = 3,360cc x cost/cc = $XXX 17cc (5 years 10,000km) x cost/cc = $XX
Cost of change oil 3~5 hrs/time x 3~5 times/year x 5 year x cost/time = $XXX —
Waste oil disposal 3~5 times/year x 5 year x cost/time = $XXX —
• Clean and environmentally friendly: Optimized oil usage prevents leaking, making it the ideal solution for clean working environments.
• Long lasting and low maintenance: Self-lubricating block is maintenance-free in most applications.
• No installation limitations: Available in all block-mounting configurations.
• Easy refillable tank: The oil is easily refillable with the new plug design.
Applications
• Machine Tools
• Manufacturing Machines: Plastic injection, paper making, textile machines, food processing machines, woodworking machines, etc.
• Electronic Machinery: Semiconductor equipment, robotics, X-Y tables, measuring and inspecting equipment.
• Others: Medical equipment, transporting equipment.

ATH E2 Self-Lubricating Model

Specification
Add “/E2” after the specification of linear guideway. (Ex: ATH-S-25HT-1600 + ZZ/E2)
Lubrication Capability
Life testing with light load
Standard
Test condition:
Model No. ATH-S-25-ST

Self Lubricant Speed 60m/min Stroke 1500mm Load 500kgf
O km

Characteristic of lubricant
1.Synthetic oils with stable characteristics
2.Temperature range of oil operations is -15°C ~ 240°C, covering most working conditions for linear guideways
3.Reduces friction
4.Anti-corrosion
5.Non-toxic

Oil Replacement Procedure
1.Pull out the rubber plug.
2.Refill the oil tank using syringe.

Dust-Proof Accessories
Selecting suitable dustproof accessories can prevent the loss in life and accuracy resulting from damage caused by iron chips or dust entering the block.

Selection Guide
Code (HG/AG Series) U (Std) DD KK ZZ Dust Proof Accessory End Seal + Bottom Seal Double End Seal + Bottom Seal Double End Seal + Scraper + Bottom Seal End Seal + Scraper + Bottom Seal Condition Normal Chips Heavy Dust or Chips Heavy Dust, Heavy Chips, Heat Chips, Work Spark Heat Chips or Work Spark

How To Specify
No symbol required for standard dust proof.
Please add “DD/KK/ZZ” for additional dust protection accessories.
Ex: ATEF25HT600 + DD

Metric Conversions
mm: Millimeter To convert inches to millimeters: multiply times 25.4. Inches to Meters: multiply inches times .0254
kN: Kilo Newton To convert kN to pounds multiply times 224.8
Kg: Kilogram To convert pounds to kg: multiply pounds times 0.4535924. To convert kg to pound: multiply times 2.20
Kgf-m: Kilogram Meters
1 kilogram meter = 9.80665 newton meters. 1 newton meter = 8.84 lb./inches
Kg to Newtons:
Multiply kg times 9.8066
Kg to KN (kilo newtons):
Multiply kg times .0098066
N: Newton
1 pound = 4.4482 newtons 1 newton = 0.2248 pounds
Glosssary
Dynamic Load Rating (C):
This load does not change in direction or magnitude
and that will result in a nominal life of 50 kilometers for
a linear guideway. Dynamic Load rating can be used to
predict service life.

Static Load Rating (Co):
Static load is a load that is constant in magnitude and
direction. The Static load rating is the maximum load
that the system can support.

Static Permissible Moment (M):
Static permissible moment is the maximum force along
three separate axes:

MR
MR – force across the axis of the rail (roll)

MP
Mp – force along the axis of the unit (pitch) My – combined axial and radial force (yaw)

Reference Surface:
The surface on the
W block or rail from which all mounting tolerances should be measured. There is a reference surface on each block and also on each rail.
Precision Accuracy:
The amount of movement that is allowed between the rail and the block.
Preload Force:
The amount of force that will allow for movement between the block and the rail. A higher level of preload force will increase drag between the block and the rail.

Mail or Fax to:
Warner Linear FAX: 815-389-6678 Application Engineering Phone: 800-825-9050 449 Gardner Street, South Beloit, IL 61080
Date Address State Title Machine Type Axis X Zip Y Company Z Other ( Name Phone ( Drawing No. ) ) City
Install Position

Model No.
Rail Mounting R (from top) T (from bottom) U (from top with bolt hole enlarged)
Dust Protection Double end seal + Bottom seal (DD) Double end seal + Scraper + Bottom seal (KK)

End seal + Scraper + Bottom seal (ZZ) End seal + Bottom seal (U) Special Option Steel end cap (SE) Self-Lubrication (E1) Lubrication Grease nipple (grease) Piping joint (oil) Other Butt-joint No Yes Number of Rails per axis I (1) II (2) III (3) Other
Reference Surface and Injection Direction
E1 E2

E1=
E2=
E3=
E4=

Other products available from Altra Industrial Motion

Clutches and Brakes
Warner Electric designed and patented the first electromagnetic clutch/brake over seventy years ago, and has led every major innovation since. Every product in Warner Electric’s extensive offering is designed for long life, exceptional reliability, and low cost of operation. Models are available to meet the demands of applications throughout the world.

Huco is recognized as the world leader in the specialized field of precision couplings. By engineering plastics in combination with metals, to develop a full range of innovative misalignment couplings, Huco has achieved an enviable record of application engineering success and a reputation for quality products and service.

Magnetic Headsets
The Precision Tork™ line of hysteresis capping clutches from Warner Electric, utilize the most efficient torque control technology on the market to provide extremely smooth, consistent application of torque with less adjustment and downtime.

Boston Gear’s comprehensive line of enclosed gear drives, including worm, in-line and parallel-shaft helical, miter, and bevel, provides the product variety you need to get the job done. Boston Gear’s speed reducers are preferred by manufacturers worldwide. In fact, every time you specify a Boston Gear product, you incorporate quality, responsiveness, and Boston Gear’s 123-year reputation into your design.

Rugged, energy efficient A-Track linear actuators from Warner Electric have been carefully designed to provide long-lasting, maintenance free operation in light, moderate and heavy-duty applications both in-plant and mobile in all types of conditions worldwide. Models are available with Acme and Ball Screw drives to meet specific requirements.

Bearing Products
When you want the freedom to select from the widest range of the highest quality bearings, come to the power transmission specialists at Boston Gear. Everything from plain sleeve bearings, ball bearings, rod ends, and spherical bearings to linear bearings, pillow blocks and flanged units are in stock.
Electrically Released Brakes
Spring-set designs are available for stopping or holding a load in the event of a power failure; or choose permanent magnet designs for dynamic stopping or cycling moving loads. Choose from C-face, UniModule or Electro Module series brakes available in shaft mounted or flange mounted designs with a torque range from 35 lb. in. to 400 lb. ft.

Boston Gear’s unique motor adapter and bushing module system design allow for quick and easy mounting of our gearheads to all popular servomotors. These stainless steel precision gearheads provide almost zero backlash with virtually no slippage. In-line, right angle and high speed models are available.

Boston Gear has been a leader and pioneer in manufacturing gearing products since 1877, when we introduced the concept of gear standardization and stock gears ­innovations of enormous benefit to power transmission system designers, specifiers, and users. Today, Boston Gear manufactures a wide range of open gearing solutions to meet your specific needs.

If you liked this, please tell us:
  • Facebook
  • Twitter
  • email
  • Print
  • Add to favorites
  • Google Bookmarks
  • RSS
This entry was posted in Motion Control and tagged , , , , , , , , , . Bookmark the permalink.

Comments:

Your email address will not be published. Required fields are marked *

*

Captcha Captcha Reload

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>